15
Parts Function
Cover the outside of the glass jar to reduce noise.
Lid
Glass Jar
Product power source.
Control panel
Measuring cup
Brush
Matters Needing Attention to Use:
The above diagram is used for reference only due to difference in appearance of product.
Specific diagram is subject to the physical object in the box.
Enclosures
Prevent ingredients from spilling, and start the product after the lid is in
place.
Food container with shredded food blade.
Main body
Control how the machine works.
For measuring dry beans, rice and other ingredients.
For cleaning products.
Direction for Use
Before use:
1. The temperature of the liquid used for the hot drink function should not exceed 60 °C.
2. The outside of the main unit can be wiped with a wrung cloth. Do not put the main unit in
water or other liquids, and do not put it in water or other liquids.Flush under other liquids to
prevent leakage or device damage.
3. when cleaning the cup body, the outside of the cup body and wipe the bottom of the cup clean
with a wrung out cloth, inside the cup. The side and lid can be washed with water; The blade is
very sharp, be careful of blade scratches when cleaning, use a brush or wear protective gloves.
Do not immerse in water or other liquid cleaning!
4. Do not use steel balls, abrasive cleaners or corrosive liquids (such as gasoline or acetone)
to clean the product.
5. When making soy milk, the maximum capacity should do not exceed the maximum hot drink
mark.
6. Please wash the ingredients and cut them into pieces with a side length of no more than
15 mm.
Description of Control Panel:
(This picture is just a schematic diagram and the specific diagram should be subject to the physical object.)
Display
Time
Temperature
Function menu display
Juice Soymilk Paste Porridge Nut milk
SoupTea
Tremella Bird's nest
Heating
TIME TEMP
MENU
Preset
Start
Stop
Stir
Wash
To Next Page
Loading...