19
Matters Needing Attention:
1. The feeling is not good, the cooking is not complete, etc. In severe cases, it will cause
overflow or smear!
2. If there is a function error and need to switch the function, please click the "Start/Stop"
button to cancel the current function. Re-select the correct program to start.
3. The ingredients in the recipe are prepared according to the standard water level.
The food type adjusts the total amount of ingredients, and the heating and cooling functions
cannot exceed the maximum mark.
4. When making fruit and vegetable accessories, please remove the core of the ingredients
before putting them into the mixing cup, and add appropriate amount of drinking water or milk.
5. Please do not use this product to directly heat thick liquids such as milk, soy-bean milk and
cold rice paste. Otherwise, food will be burnt on bottom of jar during heating. It will cause
burns such as "paste bottom", resulting in an odor.
6. During the working process of the machine, after the liquid in the mixing cup boils, please be
careful of the water vapor and splashed heat from the spout water. Do not open the lid of the
cup during work.
7. Do not add seasonings (such as sugar, brown sugar, etc.) to the cup during the production
process of the machine to avoid seasoning. Sticks to the bottom of the jar while heating.
8. Before turning on the power, please make sure that the cup cover is installed in place.
9. When the product is powered on, it is strictly forbidden to put your hands or sharp hard
objects into the mixing cup to avoid injury or damage to the product.
Direction for Use of Measuring Cup
1. When making rice paste, measure 1 cup of rice with a measuring cup,
add water to the 300mL mark, 2 cups need to add water to the 600mL
mark, add 3 cups of water to the 900mL mark.
2. When making soy milk, measure 1 cup of dry beans with a measuring
cup, add water to the 300mL mark, 2 cups need to add water to the
600mL mark, add 3 cups of water
Maintenance
1. It is appropriate to frequently use this product to keep its motor dry.
2. If it is not used for a long time, it is necessary to store this product in a dry and ventilated place
in order to keep its motor from moisture.
Cleaning and Maintenance
Cleaning
1. After the jar makes fruit juice and the latter is poured out, it is necessary to immediately add
clean water and use the mode “ Inching / Washing ” repeatedly to better clean the jar.
2. After this product is powered off, the exterior of main body can be wiped with dry cloth.
Please neither soak the main body in water or any other liquid nor rinse the main body under
water or any other liquid in order to avoid leakage of electricity or prevent components of this
product from being damaged.
3. When cleaning the cup body, the outside of the cup body and wipe the bottom of the cup clean
with a wrung out cloth, inside the cup. The side and lid can be washed with water; The blade is
very sharp, be careful of blade scratches when cleaning, use a brush or wear protective gloves.
Do not immerse in water or other liquid cleaning!
4. Please do not clean this product with any steel wire ball, abrasive detergent or corrosive liquid
(such as gasoline or acetone).
5. If any component of this product is colored by fruit and/or vegetable juice, it is necessary to add
several drops of edible oil before rinsing it to better eliminate the color.
6. Thoroughly wipe such component dry after rinsing it with clean water.
300mL
To Next Page
Loading...