JPI CUBE X Series - Page 44

DOC. NO.: JDP-013-CUBEX
Issued Date: 2017.07.21
Revision: 2017.07.21(Rev.0)
44/54 Page
6.7 Hand switch
No.
Name
Description
1
Hand Switch
(Dead-man type)
1
st
stage: The equipment gets ready when the button is half pressed with
a thumb.
2
nd
stage: The equipment exposes X-ray when the button is fully pressed
with a thumb. It automatically turns off according to the value of mAs set
by the program or when the thumb is off the switch.
2
Handle
Hand-Switch to grab with hands.
3
Connector
Connector to connect X-ray equipment and a Hand-Switch