DOC. NO.: JDP-013-CUBEX
Issued Date: 2017.07.21
Revision: 2017.07.21(Rev.0)
8/54 Page
1.2 General Hazards
1.2.1 Radiation hazards
1.2.2 Electric shock hazard
1.2.3 Explosion hazard
This system can be used with interfaced to x-ray generating equipment. Be certain to
follow the safety instructions and specifications for wearing proper lead shielding
when in the presence of x-ray generating equipment
The internal circuit of the system uses high voltage that might cause electric shock or
serious injury.
For your safety, the power cable must be connected with ground and all cables and
plugs are approved by UL. Also do not open the system case.
Do not operate the equipment in the presence of flammable or explosive liquids,
vapors or gases.
If flammable substances are detected after the system turned on, evacuate and
ventilate area before turning the system off.
To Next Page
Loading...