J+J J4C Series - Page 74

74
Index
HANDBOOK / KIT DPS
PREPARING THE COVER:
The cover of the kit is for a J4C 20, 35 and 55 models. In case you want to mount a kit on a J4C 85,
follow the instructions:
A B
O-ring
Sleeve
Sleeve
1
3
2
Cap
Cap
O-ring
Remove the cap and leave the o-ring inside the hole.
Introduce the sleeve in hole A and press it until is fully
inside (Fig.A).
Introduce the cap in hole B and press it until it is fully
inside (Fig.B)
Remove the sleeve 1 and leave the o-ring inside.
1