To Next PageTo Next Page
Need help?Do you have a question about the JR ProPo Forza 450 and is the answer not in the manual?
Explains symbols like DANGER, WARNING, NOTE for safe operation.
Advises seeking help from dealers or experienced pilots for assembly and flight.
Outlines critical safety measures for handling batteries and chargers to prevent accidents.
Details safe practices for handling helicopter parts and avoiding injury.
Covers risks during flight, interference, and environmental conditions.
Lists conditions and attire for safe operation of the helicopter.
Lists essential checks before starting the helicopter.
Step-by-step guide for safely starting the helicopter's motor.
Step-by-step guide for safely shutting down the helicopter's motor.
Advises on actions to take if abnormalities occur during flight.
Details necessary checks and maintenance after each flight session.
Lists essential accessories needed for operating the helicopter.
Lists the specific tools needed for assembling the helicopter.
Describes the proper installation direction of universal links.
Explains the symbol used for temporarily fixing parts during assembly.
Identifies the various bolts and nuts used in the assembly.
Provides methods to prevent bolts from loosening due to vibration.
Instructs on applying grease and sanding parts as needed.
Details how to install horns onto the swashplate servos.
Guides on mounting the servos for the swashplate mechanism.
Explains the process of attaching horns to the rudder servo.
Details the first stage of assembling the main helicopter frame.
Continues the assembly steps for the main helicopter frame.
Completes the main frame assembly stages.
Guides on assembling the main gear and related components.
Details the process of mounting the battery holder.
Guides on attaching the helicopter's landing gear.
Explains how to install the swashplate assembly.
Covers the assembly of the main rotor head components.
Details the installation of the tail slide ring.
Guides on assembling the tail blade holder.
Explains the attachment of the tail rotor blades.
Covers the installation of the carbon horizontal and vertical fins.
Guides on installing the tail control rod linkage.
Details the process of installing the complete tail unit assembly.
Explains how to connect the tail control rod to the servo.
Guides on attaching the tail boom brace for stability.
Details the assembly of the motor with the pinion gear.
Guides on mounting the motor onto the helicopter frame.
Covers the mounting of the receiver, gyro, and ESC.
Details the installation of the FRP body (canopy).
Explains the correct procedure for attaching main rotor blades.
Guides on repairing the swashplate assembly.
Details the repair process for servo mounts.
Covers repair for guide pulleys and tail boom holders.
Explains how to repair the pinion gear assembly.
Guides on repairing the tail pulley case.
Covers the repair of the tail blade holder assembly.
Details how to set the main rotor pitch angles for different flight modes.
Explains how to adjust the transmitter's pitch curve for optimal control.
Guides on setting the throttle curve for desired rotor RPM.
Lists critical checks to perform immediately before the first flight.
Explains how to adjust main rotor blade tracking for smooth flight.
Reviews checks and procedures to follow after assembly is complete.
Outlines essential safety checks and procedures before flying.
Advises on actions to take if abnormalities occur during flight.
Details necessary checks and maintenance after each flight session.
Outlines the terms and conditions of the product warranty.
States the manufacturer's disclaimer of liability for product use.
Provides information on obtaining repairs and after-sale support.
General| Type | RC Helicopter |
|---|---|
| Size/Class | 450 Class |
| Rotor Diameter | 710mm |
| Motor | Brushless |
| Battery | 3S LiPo |
