194
9.9 Resetting Adjustments to the Initial State
When detecting any of the following problems, turn off the power once and then turn it on again.
Radar is busy.
The screen is unstable.
The keys are locked.
If the problem cannot be solved, initialize the equipment using the following procedure.
Caution
●
●●
● When the equipment is initialized, the entire information is erased including the
initialization menu.
(a) Press the [STBY] and [TX/PRF] keys together.
The power is turned off.
(b) Turn on the power by pressing [STBY] while pressing [ACQ/ENT] and [MENU].
When the following menu is displayed, select YES by using [JOG DIAL] when initializing the
equipment.
INITIALIZE ALL SETTING
ARE YOU SURE?
NO
YES
INITIALIZE ALL
To Next Page
Loading...
