JRC JMA-5110 - Installation Setting Menu [MENU] (2;3 Pages)

26
Installation setting menu [MENU] continued (2/3 pages)
1st level 2nd level
GYRO SETTING 123.4°
SIMULATION OFF
RADAR >
GPS >
ATA SETTING >
DATA/IN OUT >
BAUD RATE >
DISPLAY MOUNT>
LCD SETTING >
BACKUP MEMORY>
INIT MENU >
INSTALLATION
GPS SETTING >
GPS SETTING2 >
DGPS SETTING >
WAAS SETTING >
GPS INFO >
ATA OFF
LEVEL H 64
LEVEL L 64
LEVEL G 64
VECTOR CONST 4
AUTO ACQ OFF
TEST VIDEO OFF
NUMBERING AUTO
GATE DISP OFF
COURSE IN COMPASS GYRO
MANUAL COURSE 000°
SPEED IN GPS BT
MANUAL SPEED 00.0 KT
POSITION IN GPS
MANUAL POS. N 36°36.000'
E136°36.000'
COMPASS PORT JLR-10(9600)
2ND PANEL DISABLE
NMEA OUT >
CALIBRATION
PC 4800
PANEL 4800
BAUD RATE
GPS
ATA SETTING
DATA/IN OUT
→ GPS SETTIGN (3rd and 4th level menus available)
Sets initial values in the GPS receiver.
↑
Display method
Press [MENU] in long mode.
→ BAUD RATE (3rd level menu available)
Sets a communication speed with a personal computer.
→ DATA/IN OUT (3rd and 4th level menus)
Sets information for receiving data from a sensor such as speed, course, an
d
position.
→ ATA SETTING (3rd level menu available)
Initializes the optional MARPA.