- xiv -
3.3.3 SWITCH DAY/NIGHT MODE [DAY/NIGHT] ............................................3-9
3.3.4 ADJUST BRILLIANCE OF INFORMATION ON RADAR DISPLAY
(BRILLIANCE SETTING) ......................................................................3-10
3.3.5 ADJUST SOUND VOLUME (BUZZER VOLUME).................................3-10
3.3.6 RESET ALARM BUZZER [ALARM ACK]............................................... 3-11
3.3.7 SET DISPLAY COLOR.......................................................................... 3-11
3.4 BASIC OPERATIONS ...........................................................................3-12
3.4.1 START TRANSMISSION [TX] ...............................................................3-12
3.4.2 STOP TRANSMISSION [STBY] ............................................................3-12
3.4.3 CHANGE RANGE (OBSERVATION RANGE SCALE) [+RANGE-] .......3-13
3.4.4 TUNE ....................................................................................................3-13
3.4.5 CONTROL SENSITIVITY [GAIN] ..........................................................3-14
3.4.6 SUPPRESS SEA CLUTTER [SEA] .......................................................3-14
3.4.7 SUPPRESS RAIN/SNOW CLUTTER [RAIN] ........................................3-15
3.4.8 REJECT RADAR INTERFERENCE [IR]................................................3-16
3.4.9 HIDE/DISPLAY RANGE RINGS (RINGS) .............................................3-16
3.4.10 HIDE SHIP’S HEADING LINE (HL OFF) ...............................................3-17
3.5 GENERAL OPERATIONS .....................................................................3-18
3.5.1 MOVE CROSS CURSOR MARK BY TRACKBALL...............................3-18
3.5.2 USE EBLS (ELECTRONIC BEARING LINES) [EBL1/EBL2].................3-18
3.5.3 USE VRMS (VARIABLE RANGE MARKERS) [VRM1/VRM2]...............3-20
3.5.4 USE P-LINES (PARALLEL INDEX LINES) [P-LINE] .............................3-22
3.5.5 MOVE OWN SHIP’S DISPLAY POSITION [OFF CENT].......................3-23
3.5.6 DISPLAY OTHER SHIPS’ TRAILS [TRAILS].........................................3-23
3.5.7 DISPLAY OWN VECTOR [OWN VECT]................................................3-25
3.5.8 EDITING OWN MARK...........................................................................3-26
3.5.9 TIME ZONE SETTING ..........................................................................3-34
3.5.10 LOCAL TIME SETTING.........................................................................3-35
3.5.11 CHANGE THE UNIT OF RATE OF TURN.............................................3-36
3.5.12 DISPLAY AIS LABEL.............................................................................3-37
3.5.13 ECHO EXPANSION SWITCH ...............................................................3-37
3.6 DISAPLAY USER MAP .........................................................................3-38
3.6.1 EDIT USER MAP ..................................................................................3-38
3.6.2 CORRECT POSITION ON USER MAP (SHIFT ). .................................3-41
3.6.3 CORRECT POSITION ON USER MAP (SHIFT CLEAR). .....................3-41
3.6.4 SET USER MAP DISPLAY (MARK DISPLAY SETTING) ......................3-42
3.6.5 OPERATE USER MAP FILE (FILE OPERATIONS) ..............................3-52
3.7 SCREEN CAPTURE .............................................................................3-63
3.7.1 SCREEN CAPTURE SETTING (SELECT CARD SLOT). .....................3-63
To Next Page
Loading...
Need help?
General
