JRC JMA-9122-6XA - Page 118

3.3.2 Operate Software Buttons ...........................................................3-15
3.3.3 Basic Menu Operation ..................................................................3-16
3.3.4 Operation on Numeric Value, Latitude / Longitude and Character
Input menu .....................................................................................3-17
3.3.5 Overview of Menu Structure .........................................................3-22
3.4 GENERAL RADAR OPERATION ........................................................3-23
3.4.1 Interference Rejection (IR) ............................................................3-23
3.4.2 Switch Transmitter Pulse Length [GAIN] ....................................3-24
3.4.3 Target Enhance (ENH) ..................................................................3-25
3.4.4 Use Video Processing (PROC) .....................................................3-26
3.4.5 Switch Azimuth Display Mode (AZI MODE) ................................3-27
3.4.6 Switch True/Relative Motion Display Mode (TM/RM) .................3-28
3.4.7 Move Own Ship’s Display Position (Off Center) .........................3-29
3.4.8 Display Radar Trails (Trails) .........................................................3-30
3.4.9 Zoom (x2) .......................................................................................3-33
3.4.10 Hide/Display Range Rings [HL OFF] ...........................................3-34
3.4.11 Hide Graphics Information on Radar Display [DATA OFF] .......3-34
3.4.12 Switch Day/Night Mode [DAY/NIGHT] .........................................3-35
3.4.13 Adjust Operation Panel Brilliance [PANEL] ................................3-35
3.4.14 Set True Bearing ............................................................................3-36
3.4.15 Set Own Ship Speed .....................................................................3-36
3.4.16 Magnet Compass Correction (MAG Compass Setting) .............3-37
3.5 USE OWN SHIP'S TRACK ...................................................................3-39
3.5.1 Display Own Ship's Track (Display Own Track) .........................3-39
3.5.2
Set Display Color of Own Ship's Track (Display Own Track Color) ..3-40
3.5.3 Save Own Ship's Track (Own Track Memory) ............................3-41
3.5.4 Cancel Saving of Own Ship's Track (Own Track Memory) ........3-41
3.5.5 Clear Own Ship's Track (Clear Own Track) ................................3-42
3.5.6 Use Expanded Own Ship's Track (Own Track Type) .................3-42
3.5.7 Use Water Depth Track (Water Depth Track) ..............................3-44
3.5.8 Use Water Temperature Track (Water TEMP Track) ..................3-45
3.5.9 Use Tidal Current Track (Current Vector Track) .........................3-46
3.6 DISPLAY USER MAP ...........................................................................3-47
3.6.1 Create User Map (Mark/Line) ........................................................3-47
3.6.2 Set User Map Display (Mark Display Setting) .............................3-50
3.6.3 Edit User Map (Edit User Map) .....................................................3-52
3.6.4 Correct Position on User Map (Shift User Map) .........................3-60
3.6.5 Save User Map ...............................................................................3-61
3.6.6 Set and Display Geodetic System (Geodetic) .............................3-65
3.7 USE ROUTE FUNCTION ......................................................................3-67
3.7.1 Display Route/Destination Mark (Select Route) .........................3-67
3.7.2 Edit Route (Set Route Sequence) ................................................3-68
3.7.3
Edit Route Make with Latitude and Longitude (Waypoint Input) .......3-75
3.7.4 Use Route Monitoring Function (Waypoint/Route Alarm) .........3-79