3ļ¼124
JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.11 USING CARD
3.11.1.3 Copy Information (Copy)
Procedures
1) While the File Manager window is open, left-click the device 1
selection button.
Selected items for Device1 will be displayed.
2) Left-click the button corresponding to the device from which data
is to be copied.
The list of files saved in the selected device will be displayed.
3) Left-click the device 2 selection button.
Selected items for Device2 will be displayed.
4) Left-click button corresponding to the device to which data is to
be copied.
The list of files saved in the selected device will be displayed.
5) Put the cursor on the data to be copied, and Left-click button.
Left-click button one more time will cancel the selection.
6) Left-click the button.
The character input screen for the Input File Name menu will appear.If there is a file having
the same name, the file selection window will appear.
7) When deleting saved data and copying new data, left-click
to select Overwrite. When adding data to a
destination file, left-click to select Add. Even in the Add
mode, WPT data and Route data are overwritten. When selection
has been made, Confirmation Window will appear.
8) Enter the file name to be saved.
Up to 10 characters can be entered. For the input method on the character input screen, see
Section 3.3.4.7 "Entering a character"
After the data has been entered, Confirmation Window will appear.
9) Left-click the button.
The entered name is written into the selected device as a file name.
COPY
1. Overwrite
2. Add
1. Yes
To Next Page
Loading...
Need help?
General
