JRC JMA-9122-9XA - C.1 Main

JMA-9100 Instruction Manual > C.Menu Index > C.1 Main
C－1
C
C.1 Main
├ 1. EBL Maneuver Setting - - - - - - - - - - - - - - - - - - - - - - - - - section 4.1.5 on page 4-14
│├1. EBL Maneuver
│├2. Reach
│├3. Turn Mode
│└4. Turn Set
├ 2. File Manager - - - - - - - - - - - - - - - - - - - - - - - - - - - -
section 3.11.1 on page 3-120
├ 3. RADAR Menu
│├1. Process Setting - - - - - - - - - - - - - - - - - - - - - - - -
section 3.8.1 on page 3-91
││├1. Video Latitude - - - - - - - - - - - - - - - - - - - - section 3.8.1.1 on page 3-91
││├2. Video Noise Rejection - - - - - - - - - - - - - - - - section 3.8.1.2 on page 3-92
││├3. AUTO Dynamic Range - - - - - - - - - - - - - - - section 3.8.1.3 on page 3-92
││├4. Process Switch - - - - - - - - - - - - - - - - - - - section 3.8.1.4 on page 3-93
││├5. 2nd Process Mode- - - - - - - - - - - - - - - - - - section 3.8.1.5 on page 3-93
││├6. Process Switch Rrange - - - - - - - - - - - - - - - section 3.8.1.6 on page 3-93
││├7. Fast Target Detection - - - - - - - - - - - - - - - - section 3.8.1.7 on page 3-94
││├8. User Function Setting - - - - - - - - - - - - - - - - - section 3.9.3 on page 3-113
│││├1. Function1 Setting
││││├1. Mode - - - - - - - - - - - - - - - - - - - - - - - -
page 3-113
││││├2. IR
││││├3. Process
││││├4. Target Enhance
││││├5. AUTO Sea/Rain
││││├6. Save Present State
││││├9. Next
││││├1. Pulse Length 0.75nm - - - - - - - - - - - - - - - -
page 3-115
││││├2. Pulse Length 1.5nm
││││├3. Pulse Length 3/4nm
││││├4. Pulse Length 6/8nm
││││├5. Pulse Length 12nm
││││├6. Pulse Length 16nm
││││├9. Next
││││├1. Video Latitude - - - - - - - - - - - - - - - - - - - -
page 3-115
││││├2. Video Noise Rejection
││││├3. AUTO Dynamic Range
││││├4. Process Switch
││││├5. 2nd Process Mode
││││├6. Process Switch Range
││││├7. Fast Target Detection
││││├9. Next
││││├1. Trails Interval - - - - - - - - - - - - - - - - - - - -
page 3-115
││││├2. Trails Mode
││││├3. Trails Reference Level
││││├4. Trails Reduction
││││├6. Trails Process
││││├7. Max Interval
││││├9. Next
││││├1. Gain Offset - - - - - - - - - - - - - - - - - - - - -
page 3-115
││││├2. PRF
││││├3. Small Buoy Detection
││││├4. Fishnet Detection
││││├5. Antenna Height
││││├8. Set Mode Default
││││└9. Initialize
│││├2. Function2 Setting
│││├3. Function3 Setting
│││└4. Function4 Setting
││└9. SART - - - - - - - - - - - - - - - - - - - - - - - - - -
section 6.5 on page 6-12
│├2. RADAR Trails Setting
││├1. Trails Mode - - - - - - - - - - - - - - - - - - - - -
section 3.8.2.1 on page 3-95
││├2. Trails Reference Level - - - - - - - - - - - - - - - - section 3.8.2.2 on page 3-95
││├3. Trails Reduction - - - - - - - - - - - - - - - - - - - section 3.8.2.3 on page 3-96
││├5. Trails Process - - - - - - - - - - - - - - - - - - - - section 3.8.2.4 on page 3-96