JRC JMA-9932-SA User Manual

taaaaoaaaaooaaaaaoaaaaaaaaooaaaooaaaooo
1-2
Initial
Settinq
IGPS
Antenna
installation
position
Setting
The distance
of the
GSP antenna from the
position
of the
radar
scanner
should
be set.
1. Left-click
lMettUlon
the
screen.
MAIN
menu opens.
z. teft-ctict
Eooe
tt*tFEtr.
CODE INPUT menu
opens.
3. Left-click
[*o-l
--
l-Errol.
ADJUST
menu opens.
+. tett-ctict
FEPRT
Ltd
.
ARPA/AIS
menu
opens.
5. Left-clickF-lS.
AIS menu
opens.
ADJUST
ARPA,/A
IS
I. GSP ANT.
LOCAT
ION
a:F tooFl
u:[* tooF]
ttTffii
0. EX IT
AIS
6.
The GPS antenna rough direction from
the
radar
scanner is
chosen
with
the GPS
button
"
P
".
7. Left-click me
Q
button
in
the
g
box of
"1.GPS
ANT.
LOCATION".
The
distance of
the
GPS antenna
from
the radar
scanner in bow-stern
direction
should be entered.
(The
direction of
the
bow
side
is
plus
and the
direction
of
the stern side is minus.)
8. Left-click
the
l$lbutton
in
the
$,
box
of "1.GPS ANT.
LOCATION".
The
distance of the GPS
anlenna from the radar
scanner
in
port-starboard
direction
should be entered.
(The
direction
of starboard side is
plus
and the
direction
of the oori side is minus.
Notet
Unless it
performs
this setup correctly, the
position
of
an AIS symbol may not
coincide
with
the
radar
echo
position
of
the
target.
Note2
When
this setup
is
performed,
offset is
added
to
the data received
from
GPS,
and the
compensated
latitude
and longitude are displayed
as own
ship
position.
lt would be
the
radar
scanner
installation
position.
A-27

JRC JMA-9932-SA Specifications

General

Brand	JRC
Model	JMA-9932-SA
Category	Marine Radar
Language	English