JRC JMA-9932-SA User Manual

oaaaaaaaooaaa
aaaoaaoaaaaoaaaaaoaaaaaaaa
14 AIS
Tarqetxl Activation
I Manual Target
Activation
An
AIS target
is activated by either
of the mehod-1
or the
method-2
as follows, and
then
the
vector
and the
heading of
the
target
are displayed.
(Method-1
: With the software
button on
the
screen)
1.
Put
the arrow
cursor
on
the
[}Ct--l
button
at the lower left of the screen
and clicks the
left
button of
the track ball.
Cursor
mode
"AlS
ACT"
is displayed
at the upper
right side
on the screen.
2.
Put the cross cursor
"+"
on the
target to
be
aclivated
and
press
the
track
ball
section
left button .
The
selected
AIS target is
activated.
(Method-2
: With the
menu operation)
t. teft-ctick
lMEtlUlon
the screen.
Main menu ooens.
2. Left-click
3.
Left-click
4. Left-click
5.
Left-click
"ON"
of
'2.AlS
ACTIVATE".
Cursor mode
"AlS
ACT" is
displayed
at the upper
right
side on the screen.
6.
Put the cross cursor
"+"
on the target to be
activated
and
press
the
track ball section left
button
.
The selected
AIS
target is aciivated.
x1
Refer to
"1.9
Definitions ofAIS
Target
Symbols"
about the activated target.
A-30
FueI
MENUI.
SUBI menu
opens.
Frs/AtrPA
ARPfuAIS menu opens.
reETrird.
AIS
SETTING
menu
opens.

JRC JMA-9932-SA Specifications

General

Brand	JRC
Model	JMA-9932-SA
Category	Marine Radar
Language	English