JRC JMA-9932-SA User Manual

A
wnRNlNG
o
Do not touch
the
insides
of the scanner. transmitter-receiver and
display
unit.
Touching any
high voltage area,
you
will
get
an electric
shock. For maintenance,
inspection and
adjustment of
internal
parts
of these
equipmenl, consult with
our
sales
ofiice
or distributor
in
your
district.
SCANNER
RADIATION HMARD
Never look
up the antenna
from which radiation
is being
output from
a distance
less than the
following
Injury may
result from exposure to
radiation
produced
by the antenna
(particularly
effects
to the
eyes) at a distance from the central front
face of the
antenna
less
than:
'
0.6 meter
for NKE-I087/1089
(Radiation power
densitv of 10Wm2)
1.1 meter
for NKE-I079/1075A
(Radiation power
densitv of 10Wm2l
21 centimeter
for NKE-1079/1075A
(Radiation
power
densitv of 100Wm2l
Install the
scanner at any
place
higher
than any
person.
lf
being exposed
directly
to electric wave at close range,
you
may
suffer adverse
influence.
When approaching
the scanner for maintenan@
or inspection, set
the
power
switch
of the display unit to the
"OFF"
or
"STBY"
position.
lf
being
exposed
directly to electric
wave to
close range,
you
may sufier
adverse
influence.

JRC JMA-9932-SA Specifications

General

Brand	JRC
Model	JMA-9932-SA
Category	Marine Radar
Language	English