JRC JMR-9282-S - Page 99

2-41 Chapter 2 System Configuration
Table 2.4.15 SLC I/O specifications 7
These 24Vdc output for buzzer are overcurrent protected by a common 15A blade fuse. (FS3)
Label
Name
Pin
Signal
Name
I/O
Specification
Detail
J8108
Contact
Out
9 OUT5 -
Dry Contact 5 or
24V Supply 5 for
Buzzer
Max. 2A
Choose Normally Open,
Normally Close, or 24VDC
Output by TB17.
See
Fig. 2.4
.14 SLC Contact
Out detail.
10 RET5 -
11 OUT6 -
Dry Contact 6 or
24V Supply 6 for
Buzzer
Max. 2A
Choose Normally Open,
Normally Close, or
24VDC Output by TB16.
See
Fig. 2.4.14 SLC Contact
Out detail.
12 RET6 -
13 OUT7 -
Dry Output 7 or
24V Supply 7 for
Buzzer
Max. 2A
Choose Normally Open,
Normally Close, or
24VDC Output by TB11.
See
Fig. 2.4.14 SLC Contact
Out detail.
14 RET7 -
15 OUT8 -
Dry Contact 8 or
24V Supply 8 for
Buzzer
Max. 2A
Choose Normally Open,
Normally Close, or
24VDC Output by TB10.
See
Fig. 2.4.14 SLC Contact
Out detail.
16 RET8 -