To Next PageTo Next Page
Need help?Do you have a question about the JRC JMR-9225-9X3 and is the answer not in the manual?
General| Type | X-Band Radar |
|---|---|
| Transmitter Frequency | 9410 MHz ± 30 MHz |
| Range | 96 NM |
| Rotation Speed | 24 rpm |
| Frequency | 9410 MHz ±30 MHz |
Procedures for powering the radar on and off, including preheating and standby states.
Adjusting display brightness, observation range, gain, and clutter suppression for optimal viewing.
Covers the process of acquiring, tracking, and managing targets using the radar system.
Details on enabling, activating, and managing AIS targets for enhanced situational awareness.
Enables monitoring of ship's position, heading, speed, and calculating ETA using a planned route.
Step-by-step guide for initiating the automatic sailing sequence.
Allows selection of a pre-planned route file for use in automatic sailing.
Specifies the waypoint from which the automatic sailing sequence should commence.
Initiates the automatic sailing function after route and waypoint selection.
Provides instructions on how to safely terminate the automatic sailing operation.
Details potential alerts and necessary countermeasures during automatic sailing.
Guides through the process of creating new user charts or editing existing ones.
Explains the tools used for drawing objects like symbols, lines, areas, and text on charts.
Procedures for creating and modifying objects like symbols, lines, and areas during manual updates.
Sets conditions for collision avoidance alerts, including CPA/TCPA limits and AIS target status.
Defines conditions for automatic acquisition target alarms, including AZ settings.
Sets conditions for grounding avoidance alerts, focusing on safety contour alarms.
Configures parameters related to automatic sailing, such as tracking gain and drift correction.
