6-27 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9 Turn the VRM dial to set [End Distance].
10 Press the EBL dial.
6.5.3 Tracked target information display
Note
When a target or own ship changes its course, or when a new target is acquired, its vector may not
reach a given level of accuracy until 3 minutes or more has passed after such course change or
target acquisition.
Even if 3 minutes or more has passed, the vector may include an error depending upon the
tracking conditions.
1 Set the cursor mode to the AUTO mode.
2 Click on the target of tracking whose numerical value is to be displayed.
Numeric data for the specified target is displayed in the information monitoring window.
Eng angle
End distance
To Next Page
Loading...
