Section 6 Target Tracking and AIS 6-64
6.9 Entering Own Ship's AIS Voyage Data
Set the own ship's AIS voyage data.
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click on [TT/AIS] - [AIS Voyage Data] on the menu.
The [AIS Voyage Data] dialog box appears.
In the [AIS Voyage Data] dialog box, information collected from AIS is displayed.
3 Enter information manually if not being displayed, or change the information being
displayed.
Item Setting
Destination Enter the destination in the [Destination] input box (maximum 20 characters),
or display the history list and click on the destination to enter.
ETA (UTC) Click on the calendar icon
to display the date picker, and enter the
expected date (and time) of arrival by clicking.
NAV Status Select the [Navigation Status] from the combo box.
For the details of Navigation Status, refer to "6.6.4 Displaying AIS
information".
Draft Enter the draft in the [Draft] input box in the range between 0 and 25.5 m.
The draft can be entered in increments of 0.1 m. If the draft is more than 25.5
m, enter 25.5 m.
Cargo
category
Select the cargo category from the combo box.
Persons
on-board
Enter the number of persons on board in the [Persons on-board] input box in
the range between 0 and 8191. If the number of persons on board is more
than 8191 persons, enter 8191.
4 Click on the [Send] button to save the input information.
To Next Page
Loading...
