Section 14 Creating a User Chart/ Updating a Chart Manually 14-58
4 Click on the position of the ending point with the cursor.
An ending point is created and the property information of the ending point is displayed on the
object property dialog box.
5 Adjust the parameters on the object property dialog box.
6 To create an object on another position continuously, repeat Steps to 3 to 5.
14.5.7.1 Creating an object by specifying the starting point/ending
point position coordinates
1
Click on the [Enter POSN] button on the drawing toolbar.
The [Enter Position] dialog box appears (Refer to "14.2.6 Creating an object by specifying
latitude and longitude").
2 Enter the coordinates of the starting point and click on the [Enter] button.
A starting point of the arrow is created on the position of the specified coordinates and the
property information is reflected in the object property dialog box. (Refer to "14.2.8 Object
property dialog box").
Ending
point
Latitude and longitude
of ending point
To Next Page
Loading...
