Section 14 Creating a User Chart/ Updating a Chart Manually 14-86
Note
The object that has been removed or deleted is excluded from the warning detection target.
14.9.2 Selecting an object type
1. Click on the [Type] button on the drawing toolbar.
An icon list dialog is displayed.
2. Select an object type by clicking on the icon on the icon list.
At manual update, the following icon list is displayed.
Icon list at manual update
The [Mariner's Mark/Line] button is not displayed on the icon list at manual update.
For the details of icons that can be selected from the icon list, refer to "Appendix C.6 Icon Button List
for Manual Update
(S-57)".
Category display
Icon list
To Next Page
Loading...
