Section 8 Functions of the ECDIS (Option) 8-8
8.3.2 Moving the chart with the cross-hair cursor
When the cross-hair cursor is moved to an arbitrary position on the chart and then clicked, the chart
can be moved. The chart moving position varies with the setting of the motion mode.
For information about the motion mode, refer to "8.6 Selecting Motion/Bearing Mode".
[When the motion mode is set to true motion]
The position of the cross-hair cursor becomes the center of the screen.
[When the motion mode is set to relative motion]
The position of the cross-hair cursor becomes own ship's display position.
Moving the position of own ship's display
Cross-hair cursor intersecting point Moving to the Center of the Screen
To Next Page
Loading...
