Section 13 Operating a Chart (option) 13-10
13.5 Displaying a Date-dependent Object
A chart object of the specified date and time can be displayed.
For instance, it is possible to display a date-dependent chart such as displaying a chart at the arrival
time of the arrival schedule at the navigation planning.
1 Click on the [Menu] button on the left toolbar.
The menu is displayed
2 Click on the [Chart] - [Date-dependent View] on the menu.
The [Date-dependent View] dialog box appears.
3 Set the [Enable Date-dependent View] check box to ON.
If the screen is closed while the check box is set to OFF, the date-dependent object is
not displayed.
4 Set the [UTC] (Universal Time Coordinated) button or [LMT] (Local Mean Time) button
to On by clicking on the button.
5 Enter a date (within the range from 1980-01-01 to 2099-12-31) and a time in the [Start
display date and time] input box.
6 Enter a date (within the range from 1980-01-01 to 2099-12-31) and a time in the [End
display date and time] input box.
7 When [LMT] is set to On in Step 4, enter a time difference in [Time Zone] box within the
range from -13:30 to +13:30.
The object displayed on the chart is updated when information is input in any of the steps from
Step 5 to Step 7.
8 Close the [Date-dependent View] dialog box.
To Next Page
Loading...
