JRC JMR-9225-9X3 - Switching a Chart to be Displayed by [My Port List]

Section 8 Functions of the ECDIS (Option) 8-10
8.3.4 Switching a chart to be displayed by [My Port
List]
If port names are registered in My Port List in the [My Port List] dialog box, chart display can be
switched to the one having the latitude and longitude of a registered port at the center of the chart.
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click on [Chart] - [My Port List] on the menu.
The [My Port List] dialog box appears.
For how to register and delete ports, refer to "8.7 Registering and Displaying My Port List".
3 Click on a port in the list to select it.
4 Click on the [Jump] button.
The chart is displayed having the latitude and longitude of the selected port at the center of the
chart.
Example: Location registered as
a port
Port list
[Jump] button