Section 9 Route Planning 9-56
9.7.3.12 Dividing a leg on the context menu
1 Click the right mouse button on the leg of the route to be divided.
The context menu is displayed.
2 Click [Divide leg...] on the context menu.
The [Divide Route] dialog box appears.
3 Input a division interval.
[Every(LON)] (longitude division)
1) Click on "Every(LON)".
2) Enter a longitude division interval.
[Every(NM)] (nautical mile division)
1) Click on "Every(NM)".
2) Enter a nautical mile division interval.
4 Click on the [OK] button.
The leg that was selected in Step 1 is divided in the unit specified in Step 3.
Note
When the total number of WPTs exceeds the maximum value of 511 as a result of leg division, leg
division is executed within the range that does not exceed 511 in the entire course.
To Next Page
Loading...
