JRC NWZ-1650 - Selecting a Sensor

4-68
4.13.5 Selecting a sensor
Specify which sensor will be displayed when two sensors are connected to one processor.
Procedure
1. Enter a password by referencing “4.2.11 Entering a password in CODE INPUT”.
Password: 1650
2.
 
Select a sensor.
Item Description
AUTO Preferentially displays the sensor of sensor port 1.
SENSOR1 Displa
y
s the sensor connected to sensor port 1.
SENSOR2 Displa
y
s the sensor connected to sensor port 2.