4-71
4.18 Measuring a trip distance
A trip distance can be measured on navigation aid screen 3.
Two trip distances can be measured simultaneously in this equipment.
4.18.1 Starting/stopping measurement
Procedure
1. Display navigation aid information 3 screen by selecting and tapping several
times.
2.
Measurement of trip distance 1 starts.
To start measurement of trip distance 2, tap .
To stop measurement, do the following.
3. Display navigation aid information 3 screen by selecting and tapping several
times.
4.
Measurement of trip distance 1 stops.
To stop measurement of trip distance 2, tap .
4.18.2 Resetting a trip distance
A trip distance can be reset.
Once a trip distance is reset, it is set to zero.
Procedure
1. Display navigation aid information screen 3 by selecting and tapping several
times.
2.
Trip distance 1 is reset.
To reset trip distance 2, tap .
To Next Page
Loading...
