JRC NWZ-1650 - Page 68

4-26
5. Set each item and tap .
First waypoint is set. To set two or more waypoints, repeat from Step 4.
6. Set a waypoint and tap .
Item Description
POSN When "POSN" is tapped, a waypoint list is displayed.
Select a wa
y
point position from the wa
y
point list.
COMMENT A comment cannot be set for a waypoint.
It can be edited from the wa
y
point list.
SYMBOL A waypoint symbol cannot be set.
It can be edited from the wa
y
point list.
COLOUR A colour of a waypoint cannot be set.
It can be edited from the wa
y
point list.
A
RRIVAL RADIUS Set an arrival radius.
WIDTH PORT Set a port route width.
WIDTH STBD Set a starboard route width.
SPEED Set a planned ship speed.
SAIL Route distance calculation method for LEG
GC: Calculated by the great circle sailing.
RL: Calculated b
y
the Meridional part sailin
g
(
Rhumb Line
)
.
STATE Set whether to use the waypoint.
USE: Use the waypoint.
SKIP: Although the waypoint is kept on the route, it is skipped.
DELETE: The waypoint is deleted from the route. It is kept in the waypoint
list.
Wa
y
points of the route that is currentl
y
bein
g
executed cannot be deleted.
ROT This item can be set for a TCS route only.
Set a Rate Of Turn.
TURN RADIUS This item can be set for a TCS route only.
Set a turn radius.
TIME ZONE This item can be set for a TCS route only.
Set a time zone.
Bearing from the
previous waypoint
LEG distance
GC/RL
Waypoint SKIP