1. MAINTENANCE
JTS hand pumps require very
little maintenance. We do
recommend the inner cylinder
be lubricated
every 3 months using silicon
grease.
STEP 1: Raise the pump to very
top of its stroke
STEP 2: Apply a small amount of
silicon grease to the inner cylinder.
Application should include the entire
cylinder top to
bottom.
NOTE: Appling to much grease
could
damage the seals
STEP 3: After applying the grease
work the pump up and down several
times. This will ensure grease is
evenly spread
DO NOT USE PETROLEUM/OIL OR PROPELLENT BASED LUBRICANTS.
OUTER
CYLINDER
INNER
CYLINDER
To Next Page
Loading...