JTS US-802D Pro - Receiver

2
3. Specication
3-1 Receiver
Receiver Model......................
Frequency Preparation......
Carrier Frequency Range
Frequency Stability...............
S/N Ratio...................................
T.H.D..............................................
Display...........................................
Display Contents...................
Controls........................................
Audio Output Level.............
AF Output Impedance.......
Squelch.........................................
Operation Voltage.................
Output Connector................
Dimension(m/m)................
US-852D Pro
Crystal
600~960 MHz
±10KHz
> 105dB
<0.6%@1KHz
LED
Antenna, RF/AF and charging
Status
Power On/O, Audio Level,
Squelch level
-12dB
600Ω
Pilot Tone, Noise and Mute
12-18 VDC, 500mA
2 XLR Balanced Sockets
1 Unbalanced Ø6.3mm Phone Jack
420(W)* 45H)* 232(D)
US-882D Pro
US-822D Pro
US-802D Pro
Crystal
600~960 MHz
±10KHz
> 105dB
<0.6%@1KHz
LED
Antenna, RF/AF Status
Power On/O, Audio Level,
Squelch level
-12dB
600Ω
Pilot Tone, Noise and Mute
12-18 VDC, 250mA
2 XLR Balanced Socket
1 Unbalanced Ø6.3mm Phone Jack
420(W)* 45(H)* 232(D)