To Next PageTo Next Page
Need help?Do you have a question about the JTS US-902D and is the answer not in the manual?
General| Modulation Mode | FM |
|---|---|
| Type | UHF |
| Audio Frequency Response | 50Hz~15kHz |
| Signal-to-Noise Ratio | ≥105dB |
| Image & Spurious Rejection | >80dB |
Essential safety guidelines for operating the wireless system, including handling power and environmental conditions.
Highlights the operational advantages and technologies employed in the wireless system, such as UHF band and PLL synthesis.
Details the general technical parameters of the wireless system, including frequency range, channels, and bandwidth.
Provides detailed technical data for the receiver unit, covering model, frequency, audio performance, and connectivity.
Outlines the technical specifications for various handheld transmitter models, including frequency, output, and battery requirements.
Details the technical specifications for body-pack transmitters, covering models, frequency, output, and operational features.
Presents specifications for lavaliere microphones, including connector types, frequency response, and polar patterns.
Details specifications for headset microphone types, including connector, frequency response, and sensitivity.
Provides specifications for ear-hook and instrument microphones, covering their unique features and performance characteristics.
Identifies and labels the various parts and controls of the US-902D receiver unit.
Illustrates and labels the components of Mh-920, Mh-930, Mh-750, and Mh-850 handheld transmitters.
Illustrates and labels the components of the Mh-8800i handheld transmitter.
Illustrates and labels the components of the PT-920B(mi) and PT-850B(mi) body-pack transmitters.
Shows the parts of lavaliere microphones (CM-501, CM-201i, CM-125i) including clip, connector, and windscreen.
Illustrates headset microphones (CM-214i, CM-214Ui, CM-214ULi, CM-235i, CX-504) and their components.
Illustrates ear-hook microphones (CM-801, CM-804i, CM-8015, CM-825i) and their components.
Illustrates instrument microphones (CX-500, CX-500F, CX-520, CX-508W, CX-516W) and their parts.
Lists and depicts various accessories included with the system, such as power supplies, cables, and rack mount kits.
Guide for connecting the receiver's audio output and power, and initial power-on and volume adjustment.
Instructions on understanding the receiver's LCD panel and performing basic channel selection.
Details on setting the Lock-On feature and adjusting the squelch level for optimal performance.
Step-by-step instructions for inserting batteries into different handheld transmitter models.
Covers battery caution, channel selection, sensitivity adjustment, and Lock mode for handheld transmitters.
Instructions for selecting channels on Mh-850/Mh-750 and Mh-8800i handheld transmitters.
Guide to operating body-pack transmitters, including battery insertion, channel selection, and sensitivity adjustment.
Instructions for installing lavaliere, headset, and instrument microphones onto the body-pack transmitter.
Instructions for installing ear-hook microphones onto the body-pack transmitter.
Steps to safely power on the receiver and transmitter for system operation.
Guide on how to match the transmitter and receiver channels for optimal signal transmission.
Instructions for using the body-pack transmitter, including AF level adjustment and belt attachment.
Tips for achieving optimal reception, maintaining device longevity, and avoiding feedback.
Information regarding government regulations, frequency usage, and where to find additional details.
