JTS US-902D - System Specifications; Overall System Specifications; Receiver Specifications

2
3. Specication
3-1 Overall System
3-2 Receiver
RF Frequency Range................
Oscillation Type..........................
Channels...........................................
Audio Frequency Response
Band-width......................................
Operation Range.........................
502~960 MHz
PLL Synthesized Control OSC
16 Channels
50~18,000Hz
24 MHz
100M
Receiver Model......................
Frequency Preparation......
Carrier Frequency Range
S/N Ratio....................................
T.H.D..............................................
Display............................................
Display Contents....................
Controls........................................
Audio Output Level.............
AF Output Impedance.......
Squelch..........................................
Operation Voltage.................
Output Connector................
Dimension(m/m)................
US-902D
PLL Synthesized Control
502~960 MHz
> 105dB
<0.6%@1KHz
LCD
Channel, Antenna A/B, RF/AF Level Meter
Power On/O, Channel Up/Down,
Squelch Level, Audio Level
-12dB
600Ω
Pilot Tone, Noise and Mute
12-18 VDC, 300mA
2 Balanced XLR Sockets
1 Unbalanced Ø6.3mm Phone jack
420mm(W)* 45mm(H)* 232mm(D)