To Next PageTo Next Page
Need help?Do you have a question about the Judo PROFIMAT JPF-A Series and is the answer not in the manual?
General| Brand | Judo |
|---|---|
| Model | PROFIMAT JPF-A Series |
| Category | Water Filtration Systems |
| Language | English |
Filtration of drinking water for domestic, commercial, and industrial use.
Ensures filtered water is drinking quality; consult manufacturer for other water types.
Specifies the maximum allowable water temperature for filter operation.
Details pressure limits for JPF-A models to prevent damage and ensure proper backwashing.
Warns about electric shock risks and specifies splash-proof requirements for electrical equipment.
Warns about water/property damage and mandates installation by qualified personnel.
Explains symbols indicating dangers, electrical warnings, and general tips.
Provides conversions for units like °F, psi, and gpm relevant to the device.
Lists the components included with the JUDO PROFIMAT filter, including the filter and manual.
Details the water flow, filtration process, and how dirt particles are removed by the device.
Specifies materials resistant to water loads and meeting hygiene standards like DIN EN 13443-1.
Highlights the CSA approval mark, confirming testing by the Canadian Standards Association for safety.
Specifies requirements for pipe support, clearances, and environmental conditions for installation.
Guides the installation of the rotary flange fitting for JPF-A ¾" - 2" models, emphasizing correct orientation.
Instructs on device placement, vertical alignment, and the necessity of shut-off valves.
Details the requirements for a suitable wastewater connection for safe and effective backwash water drainage.
Provides visual examples of correct backwash water drainage setups for various JPF-A models.
Details the procedure for initial startup, including filling, venting, and performing the first backwash cycle.
Explains the device status indicated by LEDs and how to manually activate backwashing.
Details the backwashing process to remove residues from the sieve fabric for optimal filter function.
Provides guidance on recommended backwashing frequencies based on mesh size and application.
Details the procedure for configuring the automatic backwashing interval using DIP switch S1.
Outlines the methods for initiating the backwashing cycle, including automatic and manual triggers.
Explains differential pressure-based backwashing for ATP models and how to adjust the pressure switch.
Describes the process to manually trigger the backwashing function using the device's button.
Prohibits unauthorized modifications to the device for safety and operational integrity.
Mandates that all maintenance and repairs must be performed by qualified technicians using original parts.
Details safety precautions for temporarily removing the device, including protection and storage.
Describes the potential-free input for remote control of backwashing and setting operational modes.
Explains how the device transmits backwashing and fault status signals via potential-free relays.
Instructs to clean the device exterior only with clear water to avoid plastic embrittlement.
Outlines warranty prerequisites and recommends regular inspection, servicing, and maintenance contracts.
Lists different JPF-A models (AT/ATP) with their control types and order numbers.
Provides a table with critical installation dimensions (A-G1) for JPF-A ¾" - 4" models.
Lists optional accessories like electrical circuits, cable sets, and safety blocks for JPF-A filters.
Shows the wiring diagram for device control, including LEDs, switches, and connections.
Lists spare parts for JPF-A ¾" - 1¼" models with item numbers, designations, and order numbers.
