To Next PageTo Next Page
Need help?Do you have a question about the Judo PROFIMAT-PLUS JPF+-ATP 1" and is the answer not in the manual?
General| Operating pressure max. | 10 bar |
|---|---|
| Ambient temperature max. | 40 °C |
| Connection nominal size | 1" |
| Mesh size | 100 µm |
| Mains voltage | 230 V AC |
| Filter Media | Stainless steel |
| Filtration Rating | 100 µm |
| Connection Type | Threaded |
Details critical safety warnings and the risks associated with non-compliance with instructions.
Highlights specific hazards related to electrical installations and potential-free inputs/outputs.
Provides overarching guidelines for filter installation, including required personnel and pipe support.
Specifies environmental conditions and site requirements for safe and effective filter installation.
Outlines requirements for wastewater connections and safe disposal of backwash water.
Provides step-by-step instructions for initial start-up, including filling and venting the filter.
Details how the differential pressure switch automatically triggers backwashing based on pressure changes.
Guides the configuration of automatic backwashing frequency using DIP switches based on mesh size.
Describes the automatic backwashing process, its importance, and how it ensures continuous operation.
Warns against unauthorized modifications and stresses the use of genuine JUDO spare parts.
Outlines crucial safety precautions, including depressurizing, before performing servicing or repairs.
Presents key technical specifications including flow rates, temperature limits, and power requirements.
