EasyManua.ls Logo

Judo PROFIMAT JPF-AT DN 80 User Manual

Judo PROFIMAT JPF-AT DN 80
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Attention:
Carefully read through the instal-
lation and operating instructions
and safety information before
installing and putting the unit into
service.
These must always be issued to
the owner/user.
Installation and
operating instructions
JUDO PROFIMAT-PLUS ¾" - 2"
JUDO PROFIMAT DN 65 - 100
Automatic backwash protective filter
Valid for: EU countries and Switzerland
Language: English
Fig.: JPF-A DN 65 - 100
Fig.: JPF
+
-A ¾" - 1¼"
Fig.: JPF
+
-A 1½" - 2"
Question and Answer IconNeed help?

Do you have a question about the Judo PROFIMAT JPF-AT DN 80 and is the answer not in the manual?

Judo PROFIMAT JPF-AT DN 80 Specifications

General IconGeneral
BrandJudo
ModelPROFIMAT JPF-AT DN 80
CategoryWater Filtration Systems
LanguageEnglish

Summary

Safety and Unit Information

Safety Information and Dangers

Details risks associated with non-compliance, including functional failure, electrical hazards, and environmental impact.

Intended Use

Water Pressure

Specifies the recommended water pressure range (1.5 to 10 bar) and implications of pressure outside this range.

Notes on Special Dangers

Highlights specific dangers related to electrical equipment, potential-free inputs, and outputs.

Installation

General Installation

Covers general installation requirements, including skilled personnel, pipe support, and spacing for maintenance.

Place of Installation Requirements

Specifies installation environment needs: dry, frost-free, ambient temperature limits, and access for unauthorized persons.

Discharging Backwash Water

Addresses wastewater connection requirements, dimensioning, and ensuring proper discharge for backwashing.

Operation

Commissioning

Outlines the procedure for initial startup, including filling with water and venting air to prevent water hammers.

Differential Pressure Control

Describes how the differential pressure switch initiates backwashing based on pressure drop across the filter.

Setting the Backwashing Interval

Details how to adjust the backwashing frequency using DIP switches based on mesh size and application.

Backwashing

Explains the necessity and process of backwashing to clean the fine filter screen using treated water.

Servicing and Repair

Stresses depressurizing the filter before any servicing or repair work to prevent water damage.

Fault

Maintenance

Warranty and Services

Spare Parts

Customer Service

Related product manuals