Using the Brakes
The bike comes equipped with front and rear Tektro Dorado
hydraulic disc brakes; the very best available for e-bikes. The
brakes’ main function is to slow down or to stop the bicycle.
•
The brake on the front wheel is controlled by the lever on the left-
hand side of the handlebar
•
The brake on the rear wheel is controlled by the lever on the right-
hand side of the handlebar
•
The front brake provides the majority of the bicycle's stopping
capability
•
When slowing down on slippery surfaces, use the rear brake first
before applying the front brake
•
A signal wire from each brake lever automatically cuts power to the
motor when either brake is being used. This prevents undue wear to
the electric motor
To Next Page
Loading...
