Using the cruise control
The cruise control system can be used to maintain a constant
speed. It works similar to a cruise control in an automobile. The
cruise control will deactivate if the brakes are applied, if the
throttle is moved, or if the CRUISE button pushed again. The
bicycle will return to normal operation.
How to use the cruise control feature:
•
Use the throttle (with or without pedaling) to attain your desired speed
•
Holding the throttle in a fixed position, push the “CRUISE" button
•
The LED will illuminate to indicate that the bike is in cruise mode
•
Let the throttle return to its initial position (i.e., let go of it)
•
The bike will now maintain a constant speed until:
1. The brakes are applied, or
2. The throttle is applied anew, or
3. The CRUISE button is again pressed, or
4. The battery runs down completely
!
To Next Page
Loading...
