4
5
GETTING TO KNOW YOUR CITRUS JUICER
How to Use
This product is for household use only.
GETTING STARTED
• Removeallpackingmaterialand,ifapplicable,anystickersfromtheproduct.
Remove and save literature.
• Pleasegotowww.prodprotect.com/applicatoregisteryourwarranty.For
additional information and recipes for your product go to www.juiceman.com.
• WashallremovablepartsasinstructedinCAREANDCLEANING.Thiswillremove
any traces of dust or residue left from manufacturing and shipping.
Important: Do not rinse or immerse base in water or any other liquid.
• Placebaseonadry,levelcountertoprepareandassemble,followinginstructions
inASSEMBLINGYOURJUICER.
ASSEMBLING YOUR JUICER
1. Lower the container through the base stem onto the base
(A).
2. Lower the strainer through the base stem onto the
container (B).
3. The small cone fits inside the large cone (C).
Note: When using the large cone, place the small cone inside
it or the small cone can be used by itself.
4. Choose a cone and lower it through the base stem onto
the strainer (D).
USING YOUR JUICER
1. Unwrap cord from the cord wrap underneath the base (E).
2. Plug the cord into a standard electrical outlet.
3. Cut fruit in half (orange, lime, lemon or grapefruit).
4. Remove the storage lid from the citrus juicer.
5. Place a glass under the stainless steel snap-up juice spout.
Note: When the juicing action begins, the juice flows directly into the glass.
Product may vary slightly from what is illustrated.
† 1. Storage lid (Part # POA00030000)
† 2. Self-reversing large cone
(Part # POA00075100)
† 3. Self-reversing small cone with stirrers
(Part # POA00075500)
† 4. Strainer (Part # POA00075300)
† 5. Container (Part # POA00076100)
† 6. Stainless steel snap-up juice spout
(Part # WOH00021200)
7. Base stem
8. Motor base
9. Cord storage (under unit)
Note: † indicates consumer replaceable/removable parts
ENGLISH
A
B
C
D
E
To Next Page
Loading...
