What to do if my Juiceman Juicer does not activate?
If your Juiceman Juicer doesn't start, it might be because the blade isn't properly connected to the motor base. To fix this, take the blade out of the cup and put it back in, making sure the cup and blade are twisted securely into the base.
Why does the cup leak on my Juiceman JMB1000 Juicer?
If the cup of your Juiceman Juicer leaks or comes loose from the base, the blade probably isn't screwed on tight enough. To resolve this, unplug the juicer first. Then, tighten the blade base by turning it counterclockwise. To remove the cup and blade assembly, turn it counterclockwise and lift it up from the motor base.
Detailed steps for putting together, using, and taking apart the juicer for operation.
Detailed procedures for cleaning all parts and proper storage of the juicer.
Guidance on fixing problems like the juicer stopping, cup leaks, or the unit not activating.
Covers warranty coverage, duration, support channels, and exclusions.
To Next Page
General
