JUKI HZL-80 series User Manual

When sewing buttonholes on
stretch fabric, hook heavy thread
or cord under the button-hole
foot.
Attach the buttonhole foot and
hook the gimp thread onto the
back of the presser foot.
Bring the two gimp thread ends
to the front of the foot and insert
them into the grooves, then
temporarily tie them there.
Lower the presser foot and start
sewing.
Set the stitch width to match the
diameter of the gimp thread.
Once sewing is completed, pull
the gimp thread gently to
remove any slack, then trim off
any excess.
It is suggested that you use
interfacing on the backside of
the fabric.
Note:
Making a buttonhole on
stretch fabrics
44

JUKI HZL-80 series Specifications

General

Sewing Speed	800 stitches per minute
Needle Threader	Automatic
Bobbin Winding System	Automatic
Maximum Stitch Width	7mm
Maximum Stitch Length	5mm
Lighting	LED
Display	LCD