Why are the stitches and feed uneven on my JUKI HZL-80?
Uneven stitches and feed on your JUKI Sewing Machine can be caused by poor quality thread; select a better quality thread. Also, the bobbin case might be threaded incorrectly; remove it, rethread, and reinsert it correctly.
General| Sewing Speed | 800 stitches per minute |
|---|---|
| Needle Threader | Automatic |
| Bobbin Winding System | Automatic |
| Maximum Stitch Width | 7mm |
| Maximum Stitch Length | 5mm |
| Lighting | LED |
| Display | LCD |
Covers DANGER and WARNING notices for electrical shock, fire, and personal injury prevention.
Explains safe usage, warning marks, pictographs, and general precautions.
Instructions for connecting the power cord and foot controller.
Step-by-step guide for winding thread onto the bobbin correctly.
Instructions for correctly inserting the bobbin into the bobbin case.
Detailed instructions for threading the upper thread through the machine.
Common problems, their causes, corrections, and reference pages.
To Next Page
