Need help?Do you have a question about the JUKI LBH-790 Series and is the answer not in the manual?
Details about the machine's specifications, including sewing speed, stitch length, and needle bar stroke.
Information on ordering options, codes, control boxes, and power supply for the DDL-8700 series.
Lists optional accessories such as auto-lifters and material edge sensors for the DDL-8700 series.
Technical specifications for the DDL-9000, including sewing speed, stitch length, and machine weight.
Details on ordering configurations for the DDL-9000, including machine head, dry head, and lubrication types.
Technical details for the LH-3128 series, covering sewing speed, stitch length, and needle specifications.
Optional parts and accessories available for the LH-3128 series, such as auto-lifters and micro-lifters.
Attachments for specific garment applications like top center plait hemming and side pocket hemming.
Attachments for pocket bags, slacks, pants, and skirts, designed for clean finishes.
Technical specifications for the MO-3300 series, including stitch type, speed, and dimensions.
Ordering information for the MO-3300 series, including subclass codes and power supply options.
Categorization of MO-3300 series machines by seams, materials, and number of needles.
Technical specifications for the MOC-3900 series, covering stitch type, speed, and needle gauge.
Ordering information for MOC-3900 series, including subclass codes and power supply options.
Categorization of MOC-3900 series machines by seams, materials, and number of needles.
Technical specifications for the LZ-2290 series, including sewing speed, zigzag width, and needle throw mechanism.
Overview of the fourteen basic zigzag stitching patterns available on the LZ-2290 series.
Available optional devices for the LZ-2290 series, such as automatic reverse feed kits and presser bars.
Description of the LZ-2280N model, highlighting its standard zigzag stitching capabilities.
Details about the LZ-2281N, emphasizing its wider zigzag stitching capabilities and gauge selection.
Information on the LZ-2282N, noting its standard zigzag function and integrated lower knife.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
A table detailing attachments for flat buttons, shank buttons, and wrapped-around buttons, categorized by button size.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Technical specifications for the LK-1850 series, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the LK-1850 series, including application codes and optional auto-lifters.
Categorization of LK-1850 series machines by model, number of stitches, and sewing size.
Applications for the LK-1850 model, including large bartacking for various garments.
Applications for the LK-1852-2 model, focusing on small bartacking for men's wear and coats.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Details about the machine's specifications, including sewing speed, stitch length, and needle bar stroke.
Information on ordering options, codes, control boxes, and power supply for the DDL-8700 series.
Lists optional accessories such as auto-lifters and material edge sensors for the DDL-8700 series.
Technical specifications for the DDL-9000, including sewing speed, stitch length, and machine weight.
Details on ordering configurations for the DDL-9000, including machine head, dry head, and lubrication types.
Technical details for the LH-3128 series, covering sewing speed, stitch length, and needle specifications.
Optional parts and accessories available for the LH-3128 series, such as auto-lifters and micro-lifters.
Attachments for specific garment applications like top center plait hemming and side pocket hemming.
Attachments for pocket bags, slacks, pants, and skirts, designed for clean finishes.
Technical specifications for the MO-3300 series, including stitch type, speed, and dimensions.
Ordering information for the MO-3300 series, including subclass codes and power supply options.
Categorization of MO-3300 series machines by seams, materials, and number of needles.
Technical specifications for the MOC-3900 series, covering stitch type, speed, and needle gauge.
Ordering information for MOC-3900 series, including subclass codes and power supply options.
Categorization of MOC-3900 series machines by seams, materials, and number of needles.
Technical specifications for the LZ-2290 series, including sewing speed, zigzag width, and needle throw mechanism.
Overview of the fourteen basic zigzag stitching patterns available on the LZ-2290 series.
Available optional devices for the LZ-2290 series, such as automatic reverse feed kits and presser bars.
Description of the LZ-2280N model, highlighting its standard zigzag stitching capabilities.
Details about the LZ-2281N, emphasizing its wider zigzag stitching capabilities and gauge selection.
Information on the LZ-2282N, noting its standard zigzag function and integrated lower knife.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
A table detailing attachments for flat buttons, shank buttons, and wrapped-around buttons, categorized by button size.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Technical specifications for the LK-1850 series, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the LK-1850 series, including application codes and optional auto-lifters.
Categorization of LK-1850 series machines by model, number of stitches, and sewing size.
Applications for the LK-1850 model, including large bartacking for various garments.
Applications for the LK-1852-2 model, focusing on small bartacking for men's wear and coats.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
Technical specifications for the MBH-180 series, including sewing speed, applicable buttons, and dimensions.
Ordering information for MBH-180 series, including machine head, feeder, and button carrier configurations.
Standard patterns for large bartacking, detailing stitch diagram, number of stitches, and sewing size.
Standard patterns for small bartacking, including stitch diagrams, number of stitches, and sewing size.
Optional work clamp feet and feed plates available for the LK-1900 series.
Details on needle hole guides for various machine heads, including dimensions and part numbers.
Technical specifications for the AMS-210D and AMS-210D P TYPE, covering sewing area, speed, and memory capacity.
Explanation of programming functions for AMS-210D series, including storage capacity and pattern editing.
Information on the optional needle thread clamp device and its features for improving seam quality.
Technical specifications for AMS-223/224 series, including sewing speed, stitch length, and needle gauge.
Ordering information for AMS-223/224 series, covering power supply, control panel, and motor options.
Technical specifications for the APW-297 and APW-298, covering sewing speed, stitch length, and needle gauge.
Ordering information for APW-297 and APW-298, detailing optional devices and their features.
Technical specifications for the AVP-875S and AVP-875A, including sewing area, max. sewing speed, and needle specifications.
Ordering information for AVP-875 series, including pocket style jig, configuration, and options.
Details on the optional pre-folded pocket style jig, its components, and usage for various pocket shapes.
Exchangeable gauge parts for DSU-145 and DSU-145-7, including throat plate and feed dog options.
Exchangeable gauge parts for DSU-145(-7), DNU-241H(-7), including presser foot and walking foot options.
Technical specifications for LU-2210N/W and LU-2260N/W series, covering sewing speed, stitch length, and hook type.
Ordering information for LU-2210N/W and LU-2260N/W series, detailing PSC box, control panel, and motor options.
Technical specifications for LU-2216N-7 and LU-2266N-7, including sewing speed, stitch length, and needle bar stroke.
Ordering information for LU-2216N-7 and LU-2266N-7, including needle gauge, walking foot, and presser foot options.
Technical specifications for DSC-244, 245, 246 series, covering sewing speed, stitch length, and needle type.
Ordering information for DSC-244, 245, 246 series, including feed system, control panel, and motor options.
Technical specifications for the PLC-1660 series, including sewing speed, stitch length, and needle gauge.
Ordering information for PLC-1660, 1665, 1660-7, detailing specifications, control panel, and motor options.
Technical specifications for the PLC-1690 and PLC-1691, including sewing speed, stitch length, and needle bar stroke.
Ordering information for the PLC-1690 and PLC-1691, covering throat plate, presser foot, and feed dog options.
Technical specifications for the TSH, TSN, TSU, and TSC series, including sewing speed, stitch length, and needle gauge.
Lists subclass models for TSH, TSN, TSU, and TSC series, detailing their applications and specifications.
Technical specifications for the TSC-461, including sewing speed, stitch length, and needle bar stroke.
Ordering information for TSC-461, including auto-lifter and pedal switch options.
Overview of the control panel functions, including speed control, soft-start, and pattern selection.
Detailed specifications for control panels CP-60, CP-160, and CP-360, listing functions and pictographs.
Details on PSC box, control panel, and motor options for the SC-380 series.
Information on control panel options (XC-500) and their specifications for various SC series.
Details on the optional CP-160 controller panel, including its standard functions and compatibility.
General| Weight | 45 kg |
|---|---|
| Stitch Type | Lockstitch |
| Needle System | DPx5 |
| Thread Take-up | Rotary |
| Lubrication | Automatic |
| Hook | Rotary |
| Motor Power | 400 W |
| Needle | DPx5 |
To Next Page
