Need help?Do you have a question about the JUKI LBH-1790 and is the answer not in the manual?
General| Stitch Type | Lockstitch |
|---|---|
| Max Sewing Speed | 4, 200 sti/min |
| Needle Bar Stroke | 34.6 mm |
| Type | Industrial |
| Needle | DPx5 |
| Motor | Servo Motor |
| Buttonhole Length | 8 mm ~ 40 mm |
Details the physical layout and components of the operation panel.
Explains the layout and elements of the data input screen.
Explains the layout and elements of the sewing screen.
Guides users on selecting and configuring the pedal operating procedure.
Details the steps to set the correct presser type on the machine.
Explains how to select patterns using the data input screen.
Step-by-step guide to resume sewing after an interruption.
Guides on setting up the sewing and piece counters.
Lists the default sewing data provided with the machine.
Guides on how to modify existing sewing data parameters.
Lists sewing data items, their ranges, and edit units.
Guides on registering patterns for quick access via direct buttons.
Details registering frequently used data to custom function buttons.
Details the data input screen for continuous stitching operations.
Explains the layout and elements of the sewing screen for continuous stitching.
Guides on selecting data sets for continuous stitching.
Details the data input screen for cycle stitching operations.
Explains the layout and elements of the sewing screen for cycle stitching.
Guides on selecting data sets for cycle stitching.
Guides on modifying the machine's memory switch settings.
Lists memory switch settings, their ranges, and initial values.
Describes the types of data that can be handled via communication.
Guides on inserting and removing media for data transfer.
Explains how to connect and use an RS-232C cable for communication.
Guides on viewing maintenance schedules and inspection status.
Details how to input and set inspection times for maintenance.
Details setting production targets, pitch time, and thread trimming counts.
Guides on viewing working ratio, speed, pitch time, and machine time.
Guides on performing trial sewing using data from PM-1 software.
Guides on navigating to the check program screen for diagnostics.
Explains how to adjust the needle thread trimmer's origin point.
Explains how to adjust the bobbin thread trimmer's origin point.
Guides on checking the status of various machine sensors.
Guides on calibrating the touch panel for accurate input.
Guides on viewing error logs accessible in maintenance mode.
Guides on viewing cumulative working time and stitch counts.
To Next Page
