JUKI LBH-1790 - Naming the Pattern

– 22 –
7. NAMING THE PATTERN
As many as 14 characters can be inputted to the
patterns respectively.
1
Display the data input screen.
Only in case of the data input screen (blue), input
of the pattern name can be performed. In case of
the sewing screen (green), press READY switch
and display the data input screen (blue).
2
Call the character input screen.
Press CHARACTER INPUT button (A) and
the character input screen is displayed.
3
Input the character.
Press the character button (B) you desire to input,
and input of the character can be performed.
Characters (A to Z and 0 to 9) and symbols (+, -, /,
#, ...) can be inputted. As many as 14 characters
can be inputted. The cursor can travel with
CURSOR LEFT TRAVEL button (C) and
CURSOR RIGHT TRAVEL button (D).
When you desire to delete the inputted character,
adjust the cursor to the position of the character
you desire to delete and press DELETE button
(E).
4
Finish inputting the character.
Press ENTER button (F) and inputting the
characterisnished.Afterthenish,theinputted
character is displayed in the upper part of the
data input screen (blue).
A
F
C D E
B