JUKI LBH-1790 - Setting Maintenance Inspection Times

– 111 –
30-2 Inputting the inspection time
1
Display the information screen (maintenance
personnel level).
When information key (A) of the switch
seat section is pressed in the data input screen
for approximately three seconds, information
screen (maintenance level) is displayed.In case of
the maintenance personnel level, the pictograph
located on the upper left side changes from blue
toorange,andvebuttonsaredisplayed.
A
B
2
Display the maintenance and inspection
information screen.
Press maintenance and inspection information
screen display button (B) in the information
screen.
※ Forthetwobuttonsdisplayedinthebottomstage
at the time of the maintenance personnel level,
refer to
36. INFORMATION SCREEN OF THE
MAINTENANCE PERSONNEL LEVEL,p.145
.