JUKI LBH-1790 - Table of Presser Type

– 19 –
5-2 Table of presser type
Make the number in the frame of engraved part number of presser foot correspond to the type of presser.
※ Settype5whenusingthepresserfoototherthantype1to3.Change Presser size width and
Presser size length of the memory switch (level 1) to adjust to the presser to be used.
→
Refer to
26. CHANGING MEMORY SWITCH DATA, p.77
.
※ Whenusingtype5withstitchwidthof6mmormoreand41mmormoreinlength,itisnecessaryto
replace components such as presser arm, feed plate, etc.
Type Part No. of presser foot
Type 1
B 1 5 1 1 7 7 1 0 0 0 ＊
Type 2
B 1 5 1 1 7 7 2 0 0 0 ＊
Type 3
B 1 5 1 1 7 7 3 0 0 0 ＊
Type 5 -