ā 89 ā
Error
code
Description of error
How to
recover
Place of
recovery
E001 Contact of initialization of EEP-ROM of MAIN
CONTROL p.c.b.
When data is not written in EEP-ROM or data is
broken, data is automatically initialized and the
initialization is informed.
Turn OFF the
power.
E007 Main shaft motor-lock
When large needle resistance sewing product is sewn
Turn OFF the
power.
E011 External media not inserted
External media is not inserted.
Possible to
re-enter after
reset
E012 Read error
Data read from external media cannot be performed.
Possible to
re-start after
reset.
Previous
screen
E013 Write error
Data write from external media cannot be performed.
Possible to
re-start after
reset.
Previous
screen
E014 Write protect
External media is in the write prohibition state
Possible to
re-start after
reset.
Previous
screen
E015 Format error
Format cannot be performed.
Possible to
re-start after
reset.
Previous
screen
E016 External media capacity over
Capacity of external media is short.
Possible to
re-start after
reset.
Previous
screen
28. ERROR CODE LIST
To Next Page
Loading...
