Need help?Do you have a question about the JUKI LU-563 and is the answer not in the manual?
General| Machine Type | Industrial Sewing Machine |
|---|---|
| Stitch Type | Lockstitch |
| Operation | Manual |
| Needle System | DP x 17 |
| Needle Alternate | Not applicable |
| Bobbin | Large capacity |
| Motor | Clutch motor |
| Max Sewing Speed | 2500 stitches per minute |
| Lubrication | Automatic |
| Stitching Speed | 2500 stitches per minute |
| Hook | Horizontal axis hook |
Guidelines for initial use, including oil filling, correct rotation direction check, and break-in speed limits.
Safety warnings about keeping hands clear, not operating with guards removed, and avoiding moving parts.
Overview of the LU-562 machine, its features like unison feed, and suitability for heavy fabrics.
Essential precautions before and during machine operation, including lubrication and speed.
Guidance on selecting the correct motor pulley and V-belt for desired sewing speed.
Importance of consistent lubrication, oiling points, frequency, and specific instructions for hook parts.
Information on thread twist requirements for needle and bobbin, and how to check thread twist.
Recommended needle types and sizes, plus detailed steps for correct needle insertion.
Instructions for removing the bobbin from the case and the process for winding a new bobbin.
Step-by-step guide for threading the needle using various guides and tension discs.
How to adjust the tension for both needle and bobbin threads using specific adjustment points.
Instructions for modifying the pressure exerted by the presser foot.
Guidance on setting and adjusting the stitch length using the feed graduation plate.
How to adjust the vertical movement range of the walking foot and presser foot.
Explanation of the safety clutch's function and how to set and operate it correctly.
How to adjust the thread take-up spring and tension controller for proper thread slack absorption.
Setting the correct relative position of the needle bar frame to the presser bar and feed dog.
Procedures for setting the correct height and equalizing the rising amount of the presser and walking feet.
How to align the sewing hook tip closely to the needle to prevent thread breakage.
Setting the needle bar height and matching the timing of the hook blade with the needle.
Instructions for removing the bobbin case and the entire sewing hook assembly.
Procedure for adjusting the vertical height of the feed dog.
Steps involved in removing and replacing the needle bar frame rock shaft.
How to correctly position the feed graduation disc for accurate stitch length settings.
Detailed instructions for removing and replacing the timing belt, ensuring correct synchronization.
Specific lubrication instructions for the sewing hook and shaft components on the LU-563 model.
Detailed steps for removing the sewing hook assembly for the LU-563 model.
To Next Page
