To Next PageTo Next Page
Need help?Do you have a question about the JUKI LU-1510N and is the answer not in the manual?
General| Max. Stitch Length | 5 mm |
|---|---|
| Lubrication | Automatic lubrication |
| Feed Mechanism | Drop feed |
| Type | Lockstitch |
| Application | Heavyweight materials |
| Stitch Type | Lockstitch |
| Max. Sewing Speed | 2500 SPM |
| Needle | DB x 1 |
| Hook | Rotary hook |
| Lubricating Oil | JUKI sewing machine oil |
| Dimensions | 480 mm |
Adjusts the needle's position relative to the throat plate for optimal sewing.
Synchronizes the needle and hook movement for stitch formation.
Sets the lifting height of the presser foot for material handling.
Adjusts the timing of the feed cams for proper material advancement.
Details manual and automatic lubrication methods and checks.
Covers adjustments for the thread trimmer components.
Sets the pressure for the cutting knives to ensure clean thread trimming.
Sets the timing for the thread trimmer cam.
Instructions for installing the DL device on machines with thread trimmers.
Steps for installing the automatic reverse feed device.
Steps for installing the automatic presser foot lifter.
Detailed list of components for the automatic presser foot lifter.
List of pneumatic device components.
Specifies Locktite application for the feed adjusting rod hinge screw.
Specifies Locktite application for the vertical change base arm pin.
Lists parts common to all LU model series.
Lists selective and consumable parts for specific LU models.
Lists pin assignments for connectors originating from the machine head.
Lists pin assignments for connectors from pneumatic devices.
Addresses common problems encountered during sewing operations.
Solutions for issues related to thread trimming performance.
