･Conventionally, the front plate has to be removed to change the work clamp. With the new work clamp
kit, the work clamp can be changed without removing the plate.
● 2-pedal unit for standing work
✽
[Part No. M85205800A0]
✽ To connect the cable asm. to the electrical box,
conversion cable (separately available) is necessary.
● Pedal switch conversion cable asm.
[Part No. M90125900A0]
● PK-57
✽
[Part No. GPK570010B0]
for the LK-1900A Series
Simple work clamp kit
Simple work clamp kitSimple work clamp kit
●Simple work clamp kit
Part No.: 40057279
✽The work clamp cover plates (right and left) are not
included in the kit.
･The lever for lifting the work clamp can be
independently slid back and forth.
･The machine parts can be adjusted and
replaced entirely by hand without
screwdrivers or others tools. Changing parts
is now a "clean-hands" procedure.
■ OPTION
● Foot pedal for standing work
(optional)
To Next Page
Loading...
